Discounts / Stock
DISCOUNTS: When you buy 1 > Regular Price: $269.00USD • When you buy 2 or more > Sale Price: $242.10USD • Save: $26.90USD (10%)!
Shipping can take from a couple of days up to 6 weeks here’s why.
We felt that an “ultimate” attenuator for the BeePre needed to be done to a higher standard and we felt that it would be reasonable to make the kit similar in price to the other high end attenuators on the market. So we got very high quality rotary switches and PB put his math degree to work coming up with a very useful thirty-six 1.5dB steps, yielding a total -52.5db of attenuation. Yes, you read that right, 36 steps. We accomplish this with two six position switches, one a stereo coarse control with 9db steps and the other a stereo fine control with 1.5 db steps. Simply set the coarse control in the general range you want to listen and then use the fine control to get the level perfect. Now that high quality attenuator is available for the Crackatwoa. The switches are populated with Vishay Dale metal film resistors, a resistor that has remained a favorite of ours over the years for attentuator use. The TwoQuiet coarse and fine stereo switches replace the stock carbon pot volume and balance controls in the Crackatwoa. They mount on a custom aluminum sub-chassis, and we provide a neat overlay for the top of the chassis, with attenuation settings, input selector setting and a cool vintage look.
As always the kit comes with an extensive, detailed manual. Assembly and installation is probably a one or two evening affair. And now to address the question in everyone’s mind – why install this upgrade? When we put the protoype in our production prototype BeePre the bass punch and dynamics became like Wow! Can’t say for sure why, as both the stock pots and the BeeQuiet are about the same impedance at around 50K ohms. So this is another case where we won’t try to come up with some far fetched theory. We will just suggest strongly that you build the Crackatwoa with the stock volume and balance pots first, then install the TwoQuiet upgrade and share your impressions.
Installed the BeeQuiet and upgraded the caps to ClarityCap MR 10uf 400V.
I am sure it is a combination of both upgrades, but WOW does it sound great. Clarity, and detail is vastly improved from the stock configuration, very immersive sound stage, and the caps have not had any time to open up yet. I am impressed, it blows my Extended Foreplay III out of the water.
Bottlehead, what an incredible preamp you came up with, I couldn’t be happier!!!!