News: Trouble logging in? Log in from the login page.
June 18, 2019, 08:05:09 am

Author Topic: Quickie in Finland  (Read 1337 times)

0 Members and 1 Guest are viewing this topic.

Offline IndyNate

  • Newbie
  • *
  • Posts: 7
Re: Quickie in Finland
« Reply #15 on: June 05, 2019, 08:03:17 pm »
If I'm not mistaken, Joppa has said the PJCCS will actually reduce battery life by ~17%. This isn't a problem for me, as life without the PJCCS isn't worth listening to! It's a truly astonishing and needed upgrade. And yes, upgrading the coupling caps to anything Soviet makes a huge improvement. I use MBM paper-in-wax. You won't go back to poly caps.

Offline aholata

  • Jr. Member
  • **
  • Posts: 13
Re: Quickie in Finland
« Reply #16 on: June 09, 2019, 10:57:35 pm »
Man, i still haven't had the stroke if inspiration or time (read being just lazy) to install the PJCCS...I'm sure i really should do it but just don't seem to get myself around to do it. I was really close though other day, i started some modifications on my quickie, installed mundorf caps and better potentiometer, the dact copy from ebay. But run out of the time to get to the PJCCS installation.

One question about it too, mine replacement pot is 20K, odered originally for B1 project, Is it Ok or should i oder 100k one?

The cap upgrade was very hearable betterment, potentiometer might made the sound little leaner, hence my question about the resistance of the pot. I'm running HQMC phono and Soekris DAC in to it soekris is 20ohm out and could't find the HQMC specs but the effect was same with both sources.

It could be just driving the pot in situation since it doesn't bother me that much any more and it was unused part, or sound might just goten little cleaner witch releted to me as leaner since there wasn't so much extra stuff coming out.

-Tatu-

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 10815
Re: Quickie in Finland
« Reply #17 on: June 10, 2019, 04:12:06 am »
A 20K pot will work, but is a pretty hefty load for some tube output stages compared to a 100K pot.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man